Training Electrical Transformer Testing and Maintenance
Training Electrical Transformer Testing and Maintenance
0
Yogyakarta Training

Training Electrical Transformer Testing and Maintenance

COURSE DESCRIPTION:

This course covers the theory, operation, maintenance and testing of power transformers and auxiliary equipment. Topics included are transformer fundamentals, transformer ratings, transformer cooling, nitrogen gas systems and insulation systems. The source concludes with in-depth discussions on transformer testing techniques. This course is applicable to technicians and engineers who need a sound understanding of power transformer operation and maintenance.

Students will learn safe and proper maintenance and testing procedures on pad-mounted, power transformers. The course covers transformers used in commercial and industrial power distribution systems, including oil and dry-type units. Larger power transformers used in utility applications are also covered.

Load and no-load tap changer maintenance, ac and dc testing, routine inspections and oil sampling and testing are covered in detail. Students will learn how to perform routine oil tests, and understand how to perform the major tests that are required. A variety of electrical test equipment from various manufacturer’s will be discussed.

 

Who Should Attend:

Field and shop technicians, field engineers, supervisors and others responsible for the testing and maintenance of power transformers rated 750kVA to 500MVA and 4.16kV to 500kV.

 

LEARNING OUTCOMES

Upon completion of this course, the participant should be able to:

  • Explain the basic operation of a transformer.
  • Discuss turns ratios and calculate terminal voltage and current.
  • Discuss terminal markings and various single phase and three phase wiring schemes. (WYE vs DELTA).
  • Explain how to perform a polarity test on a potential transformer.
  • Discuss the electrical testing performed on transformers such as insulation resistance testing, excitation and power factor testing.
  • Discuss the various tests performed on insulating oil.

 

COURSE OUTLINE

  1. Transformer Principles
    • Transformers
    • Right Hand Rule
    • Magnetic Flux
    • Magnetic Induction
    • Left Hand RuleTurns Ratio
    • Transformer Losses
    • Transformer Types
  2. Vector Diagrams
    • Operating Principles
    • Operation Without Load
    • Operation with Load
  3. Transformer Classifications
    • Service Classification
    • Instrument Transformers
      1. Current
      2. Potential
  1. Transformer Construction (Construction)
    • Magnetizing Circuits
    • Losses
      1. Hysteresis Loss
      2. Eddy-Current Loss
    • Efficiency
      1. Cooling
    • AirCooled Oil-Immersed
      1. Water-Cooled
      2. Forced-Oil Cooling
      3. Self-Cooling with Air Blast
    • Temperature Limits
    • Transformer Loading
      1. Tap Changers
    • No-Load Tap Changer
    • Tap Changing Under Load
    • Phase-Angle Control
  2. Transformer Connections
    • Single Phase Circuits
    • Two-Phase Circuits
    • Three-Phase Circuits
  3. Transformer Maintenance
    • Insulation Testing
    • High Potential Testing
    • Turns Ratio Testing
    • Polarity Testing
    • Power Factor
    • Excitation Current
    • DC Winding Resistance
    • Polarization Recovery
    • Insulating Fluid Dielectric
    • Dissolved Gas Analysis
  4. Transformers and Relaying
    • Transformer Faults
    • Differential Relaying
  5. Normal Load
  6. External Faults
  7. Internal Faults

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Electrical Safety
Training Electrical Safety
0
Yogyakarta Training

Training Electrical Safety

 

 

DESCRIPTION

Electrical safety training starts with your’s company’s commitment to your well being. Our Electrical safety training course is designed to train your electrical staff on the proper care, maintenance, inspection and utilization of the electrical systems in industrial, commerical and institutional locations. It is also designed to ensure that arc flash program delegates are instructed to work within the guidelines of current Federal (CSA), provincial, Electrical Utility Safety Association (EUSA) and OSHA (Canada) safety regulations. Our arc flash protection program will help employees and companies reduce the risk of personal injury and equipment damage due to operator error. The course is also designed to ensure that, under emergency conditions, the proper steps are taken to restore power in an efficient and safe manner. Arc Flash Protection.Understand the hazards of electricity at the power system supply level. Material includes the review of electrical blast, electrocution, short circuits, overloads, ground faults, fires, lifting and pinching injuries. Important Definitions. Review the principles, governmental regulations, work practices and specialized equipment relating to personal protection. A documented safe practice system is now required by OSHA 29CFR1910 Subpart R and Subpart S, which will be covered in this course. Personal Protective Equipment. Develop a familiarity with the different types of “Personal Protective Equipment” through demonstrations of locking and tagging devices, protective clothing and specialized equipment. Isolation and Lockout Practices. Learn proper procedures for the lockout and isolation of electrical equipment and compare them to existing site regulations and policies.

 

OUTLINE

  1. Safety Policies, Codes and Procedures For Electrical Power Systems
  2. Electrical Safety for Industrial Facilities.

This course meets OSHA mandated training requirements under 29 CFR 1910.332 for safety-related work practices and 29 CFR 1910.269 for medium-voltage distribution systems.OSHA mandated personal protection requirements:

  • OSHA 29 CFR 1910.303
  • OSHA 29 CFR 1910.331-.335
  • OSHA 29 CFR 1910.137
  • OSHA 29 CFR 1910.269
  • OSHA 29 CFR 1910.147

Electrical safety training students will learn the OSHA mandated special precautionary techniques and the use of electrical protective equipment. The course will also cover the use of arc protective equipment, insulated hand tools, and protective and substation grounding. Each student receives a copy of the course text that includes the OSHA regulations.

  1. Power System Hazards
  2. Power System Faults

Facts and Figures:

  • Major Causes: Act of God, Human or Operator Error, Equipment Breakdown
  • Short Circuits
  • Overloads
  • Fires
  • Electrocution
  • Important Definitions
  1. Personal Protective Equipment
  • Introduction
  • Personal Body Protective Equipment
  • Testingand Grounding
  • Live Line Tools
  1. Temporary Grounding
  • Introduction
  • Purpose
  • Work Methods
  1. Hazards of Isolated Equipment
  • Induction
  • Accidental Energization
  • Wind
  • Lightning
  • Grounding Equipment for Overhead Lines – General
  • Adequate Capacitance Clamps
  • Adequate Capacity Cables
  • Overhead Grounding Sets
  • Installation of Temporary Grounds
  1. Potential Indicating Devices
  • Introducton
  • Purpose
  • Potential Indicators:
    • Volt Meters
    • Clip-on Ammeter
    • Clip-on Watt Meter
    • Phase Rotator
    • Preparation of Temporary Grounding
  1. Isolation and Switching Procedures
    • Introduction
    • Self-Protection
    • Red Tag

Work Protection Guarantees

Work Permit

Work and Test Permit

Station Guarantee

  1. Switching Practices
  2. Lockout Procedures
    • Individual Lockout
    • Lock Box Method
    • Sign In Method
    • Removal of a Personal Safety Lock

Safe Limits of Approach: Authorized Person

Safe Limits of Approach: Competent Person

  1. Safe Operation and Maintenance Procedures Electrical Power Systems

Safety Practices and Equipment Review

Safety Equipment Review

Safety Practices Review

Lockout policies vs. procedures

Importance of accurate drawings

Commissioning vs. Maintenance Safety Guidelines

Transformer Operation and Maintenance Safety

Maintenance Testing Safety practices

Oil sampling, Tapchangers, Testing

Switchgear Operation and Maintenance Safety

Grounding Practices and Principals

Safety in Maintenance Testing

Operating HV and MV Breakers and Switches

Electrical System Safety

Control systems, CTs and PTs

Capacitors and Reactors

Power Cables

 

WHO SHOULD ATTEND:

Utility, industrial and commercial electrical personnel involved in hands-on roles or maintenance planning. This including engineers, technicians, electricians, linemen, supervisors, and other personnel who work on or near energized and de-energized electrical equipment and systems.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Power System Coordination
Training Power System Coordination
0
Yogyakarta Training

Training Power System Coordination

 

COURSE OBJECTIVES:

  • Recognize Coordination Related Disturbances and Outages.
  • Collect the Required Data to Perform a Detailed Coordination Study.
  • Derive Complete Protective Settings for Some of the Simpler Electrical Power Systems that are Consistent with NEC Requirements, and Safe and Reliable Facilities’ Operations.

 

WHO SHOULD ATTEND:

The course is suggested for graduate engineers or personnel with equivalent work experience in electrical power systems. Attendance at The Electricity Forum Power System Analysis Seminar or equivalent is strongly recommended as a prerequisite.

 

COURSE CONTENT

  • Power System Fundamentals

Balanced Three-Phase Loads

Unbalanced Three-Phase Loads

Substation Configurations (Radial, Loop, etc.)

  • Short Circuit Theory, Terminology and Studies

Fault Current Sources and Characteristics

Equipment Ratings and Asymmetrical Factors

Analysis of a Computerized Fault Study

  • Overcurrent Coordination Fundamentals

General Procedures

Data Requirements

  • Plotting Protective Devices

Fuses

Molded Case Circuit Breakers and MCPs

Low Voltage Power Circuit Breakers

Protective Relays

  • Power Systems Grounding

Symmetrical Components

Grounded and Ungrounded Systems

Ground Fault Detection and Coordination

  • Conductor and Bus Protection

Cable Damage Criteria

Low and Medium Voltage

Tie Line Protection

  • Transformer Protection

Overload Protection

Phase and Ground Fault Protection

Primary Fuse Protection

Primary Breaker Protection

  • AC Induction Motor Protection

NEC and ANSI/IEEE Standards

Motor TCC Curves

MCP Low Voltage Protection

NEMA Class E2 Controllers

Thermal Overload Protection

Thermal Locked Rotor Protection

Phase and Ground Fault Protection

Miscellaneous Protection (Undervoltage, Single-Phasing, etc.)

 

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Power Quality Harmonics
Training Power Quality Harmonics
0
Yogyakarta Training

Training Power Quality Harmonics

 

COURSE DESCRIPTION:

The Power Quality and Harmonic Analysis Seminar combines extensive field measurement and study experience to familiarize attendees with the terminology and concepts to evaluate power quality. The effects of harmonics on various power system components and methods of reducing excessive harmonics will also be addressed. IEEE recommendations, National Electric Code requirements and Canadian Standards Association are also emphasized in this course.

 

COURSE OBJECTIVES:

  • Describe various equipment used for power monitoring.
  • Recognize the cause and source of power system disturbances.
  • Explain how to mitigate any existing and potential problems, thereby minimizing equipment disoperation and process downtime.
  • Analyze types of electrical systems loads and their power quality considerations.
  • Calculate harmonic voltages and currents

 

WHO SHOULD ATTEND:

This course is intended for graduate engineers or personnel with equivalent work experience in electrical power systems.

 

COURSE CONTENT

  1. Introduction to Power Quality Analysis

Review of Industrial Power Systems Concepts

Power Quality Definitions

Equipment Ratings

Effects of Disturbances on Equipment and Processes

  1. Industry Commitment to Power Quality

IEEE Standards and Recommendations

EPRI Survey Results

  1. Harmonics

Sources of Harmonics

Symptoms and Effect on Equipment

Power Factor Capacitors and Resonance

Harmonic Limitations (IEEE Standard 519)

Series Resonance and Filter Design

Third Harmonic Neutral Current

  1. Calculation of Harmonic Voltages and Currents

System Harmonic Models

The Current Injection Method

Frequency Response Modeling

  1. Grounding

Types of Grounding

Arcing Ground Faults

Symptoms of Ineffective Grounding

Electronics and Computer Grounding

  1. Voltage Disturbances

Lightning

System Switching

System Faults

Sags

Swells

  1. Measurement Techniques

IEEE Emerald Book -Conducting Site Surveys

Manufacturers’ Terminology

Grounding Measurements

Disturbance Measurements

Waveform Signatures

  1. Mitigation Techniques

K-Factor Transformers

Power Line Conditioners

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

Training Substation Maintenance
Training Substation Maintenance
0
Yogyakarta Training

Training Substation Maintenance

 

COURSE DESCRIPTION:

Participants will cover the maintenance and testing requirements for common substation devices, including power transformers, oil, air and vacuum circuit breakers, switchgear, ground grid systems, batteries, chargers and insulating liquids. This course focuses on what to do, when to do it and how to interpret the results from testing and maintenance.

 

COURSE OUTLINE:

  1. Introduction
  • Student introductions
  • Pre-Test
  • Safety
  1. The Substation As A System
  • Application
  • Common problems
  • Ratings

III. Circuit Breaker Maintenance

  • Maintenance frequencies
  • Inspection
  • Testing
  • Interpreting test results
  • Devices covered
    1. Air circuit breakers
    2. Vacuum circuit breakers
    3. Oil circuit breakers
    4. Insulating Liquids
  • Sampling
    1. Routine tests
    2. Dissolved-Gas Analysis (DGA)
  • Testing
    1. Color
    2. Dielectric breakdown voltage
    3. Interfacial tension
    4. Neutralization number
    5. Moisture
    6. Visual
  • Dissolved-Gas Analysis (DGA)
  • Interpreting test results
  1. Transformers
  • Types
  • Inspection
  • Testing
    1. Insulation resistance
    2. Winding resistance
    3. Power factor tests
    4. Core excitation current
    5. Turns ratio (TTR)
    6. Gas blanket tests
  1. Lightning Arrestors
  • Types
  • Inspection
  • Maintenance
  • Testing

VII. Protective Relays

  • Application
  • Instrument transformers
  • Inspection
  • Testing
  • Calibration
    1. Devices covered
    2. Voltage
    3. Transformer differential

VIII. Ground Grid Systems

  • Purpose
  • Grounding theory
  • Types of test equipment
  • Inspection
  • Testing
  1. Batteries and Chargers
  • Types of station batteries
  • Battery systems
  • Maintenance
  • Inspection
  • Testing

 

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Electrical Circuit Breakers - Maintenance
Training Electrical Circuit Breakers – Maintenance
0
Yogyakarta Training

Training Electrical Circuit Breakers - Maintenance

COURSE DESCRIPTION:

This electrical circuit breakers-maintenance training course will discuss application, installation, maintenance and testing issues related to low-, medium- and high-voltage switchgear and electrical circuit breakers. The course will provide the delegates with a solid understanding of switchgear theory and standards. The course will also make delegates aware of issues concerning the proper application, installation and maintenance of these types of equipment with a strong emphasis on safety. The course will cover a wide range of material starting from the basics and moving on to more complex issues.

This course provides an overview of power system design and theory, focusing on the power distribution electrical circuit breakers used in common utility, industrial, commerical and institutional applications. Basic electrical circuit breaker construction, electrical safety, and common circuit breaker maintenance techniques are the major components of this course.

When brought on-site, this course can be supplemented by an in-depth study of the specific circuit breaker models used at the client’s facility. Hands-on training is provided wherever practical.

 

WHO SHOULD ATTEND:

This course is recommended for skilled trades, supervisors, and anyone involved in the maintenance of industrial power circuit breakers.

 

COURSE OBJECTIVES:

This course is designed to enable participants to:

  • List the voltage convention classifications used in this course.
  • Describe switchgear construction.
  • Describe a ground fault relay system.
  • Describe the three basic types of low and medium voltage circuit breaker contacts.
  • Describe the molded case circuit breaker

 

COURSE OUTLINE:

  1. Low Voltage Switchgear, Theory and Applications

Establishing a solid understanding of electrical switchgear design and operation is vital to its safe and reliable application. This course provides valuable technical information on low voltage circuit breakers and switchgear used in common industrial, commercial and utility applications.

  • General Introduction
  • The Spectrum of Switchgear
  • Standards-Standards Organizations, Certification Marks and Applicable Standards
  • Switchgear Drawings
  • Switchgear Ratings
  • Difference Between Switchgear & Switchboards
  • Switchgear Factory Testing
  • Short Circuit Current Estimation
  • Ground Fault Protection
  • Modern LV Switchgear-Design Features and Benefits
  • Modern LV Power Circuit Breakers
  • Modern LV Trip Units
  • Wrap-up, Final Questions
  1. 4160 Volt Breaker Overview
    • Purpose/application
    • Circuit breaker construction
    • Circuit breaker operation
    • Circuit breaker control
    • Personnel and equipment safety factors
  2. 4160 Volt Breaker Maintenance
    • General breaker maintenance
    • Adjustment
    • Inspection and testing
    • Maintenance intervals
    • Troubleshooting and repair
  3. Low-Voltage Breaker Overview
    • Purpose and application
    • Circuit breaker construction
    • Circuit breaker operation
    • Circuit breaker control
    • Personnel and equipment safety
  4. Low-Voltage Breaker Maintenance
    • Inspection and testing
    • Adjustments
    • Troubleshooting and repair
  5. Switchgear Overview
    • System overview and interactions
    • Switchgear components
    • Power buses
    • Safety
  6. Grounding
    • Principles of grounding
    • Grounding procedures
    • Ground and test device
  7. Switchgear Maintenance
    • Operation of switchgear devices
    • Preventive maintenance
    • Testing
    • Corrective maintenance

 

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Electrical Circuit Breakers - Maintenance
Training Electrical Circuit Breakers – Maintenance
0
Yogyakarta Training

Training Electrical Circuit Breakers - Maintenance

 

COURSE DESCRIPTION:

This electrical circuit breakers-maintenance training course will discuss application, installation, maintenance and testing issues related to low-, medium- and high-voltage switchgear and electrical circuit breakers. The course will provide the delegates with a solid understanding of switchgear theory and standards. The course will also make delegates aware of issues concerning the proper application, installation and maintenance of these types of equipment with a strong emphasis on safety. The course will cover a wide range of material starting from the basics and moving on to more complex issues.

This course provides an overview of power system design and theory, focusing on the power distribution electrical circuit breakers used in common utility, industrial, commerical and institutional applications. Basic electrical circuit breaker construction, electrical safety, and common circuit breaker maintenance techniques are the major components of this course.

When brought on-site, this course can be supplemented by an in-depth study of the specific circuit breaker models used at the client’s facility. Hands-on training is provided wherever practical.

 

WHO SHOULD ATTEND:

This course is recommended for skilled trades, supervisors, and anyone involved in the maintenance of industrial power circuit breakers.

 

COURSE OBJECTIVES:

This course is designed to enable participants to:

  • List the voltage convention classifications used in this course.
  • Describe switchgear construction.
  • Describe a ground fault relay system.
  • Describe the three basic types of low and medium voltage circuit breaker contacts.
  • Describe the molded case circuit breaker

 

COURSE OUTLINE:

  1. Low Voltage Switchgear, Theory and Applications

Establishing a solid understanding of electrical switchgear design and operation is vital to its safe and reliable application. This course provides valuable technical information on low voltage circuit breakers and switchgear used in common industrial, commercial and utility applications.

  • General Introduction
  • The Spectrum of Switchgear
  • Standards-Standards Organizations, Certification Marks and Applicable Standards
  • Switchgear Drawings
  • Switchgear Ratings
  • Difference Between Switchgear & Switchboards
  • Switchgear Factory Testing
  • Short Circuit Current Estimation
  • Ground Fault Protection
  • Modern LV Switchgear-Design Features and Benefits
  • Modern LV Power Circuit Breakers
  • Modern LV Trip Units
  • Wrap-up, Final Questions
  1. 4160 Volt Breaker Overview
    • Purpose/application
    • Circuit breaker construction
    • Circuit breaker operation
    • Circuit breaker control
    • Personnel and equipment safety factors
  2. 4160 Volt Breaker Maintenance
    • General breaker maintenance
    • Adjustment
    • Inspection and testing
    • Maintenance intervals
    • Troubleshooting and repair
  3. Low-Voltage Breaker Overview
    • Purpose and application
    • Circuit breaker construction
    • Circuit breaker operation
    • Circuit breaker control
    • Personnel and equipment safety
  4. Low-Voltage Breaker Maintenance
    • Inspection and testing
    • Adjustments
    • Troubleshooting and repair
  5. Switchgear Overview
    • System overview and interactions
    • Switchgear components
    • Power buses
    • Safety
  6. Grounding
    • Principles of grounding
    • Grounding procedures
    • Ground and test device
  7. Switchgear Maintenance
    • Operation of switchgear devices
    • Preventive maintenance
    • Testing
    • Corrective maintenance

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Advanced Cable Accessories
Training Advanced Cable Accessories
0
Yogyakarta Training

Training Advanced Cable Accessories

Course Description:

Professional “On-site” training on Distribution underground cable accessories from 5KV – 69KV from various manufacturers. The course is designed according to the type of cable and cable accessories utilized by your company.

 

Who Should Attend:

This course is recommended for Maintenance Electricians, Electrical Contractors, Safety Inspectors, Supervisors, Engineers.

 

Course Objectives:

In this course participants will learn:

  • Overview of Tape Products
  • Electrical Tape Utilization
  • Overview of Low Voltage Splicing
  • How to perform Low Voltage Splicing
  • Overview of High Voltage Terminations
  • How to perform a High Voltage Termination
  • Overview of High Voltage Splicing
  • How to perform a High Voltage Tape Splice
  • Overview of High Voltage Premolded Splicing
  • How to perform a High Voltage Premolded Splice

Course Pre-requisites:

  • General Safety Procedures/Practices
  • Basic Electrical theory

Required Materials:

  • Cable pieces
  • High Voltage tools

 

Course Outline:

  1. INTRODUCTION
  2. Class Introductions
  3. Course Overview
  4. Documentation Overview
  5. Practical Application
  6. Jobsheet #1 – Perform an undemonstrated 1KV tape splice
  7. Overview of practical application
  8. Fundamentals of Low Voltage splicing
  9. Overview of low voltage splicing methodologies
    1. Resin
    2. Tapes
    3. Heat shrink
    4. Cold Shrink
  10. Overview of low voltage Cold Shrink Technologies
    1. Cold Shrink Technology definitions
    2. Cold Shrink applications
    3. Comparative analysis of cold shrink vs. heat shrink
  11. Practical Application
    1. Jobsheet #2 – Perform a 3/Conductor 1KV teck cable splice

III. Fundamentals of High Voltage Termination

  1. High Voltage Functional elements
    1. Cable components
    2. Electrical characteristics
  2. High Voltage Termination Techniques
    1. Termination Classifications
      1. Class 1 Terminations
      2. Class 2 Terminations
      3. Class 3 Terminations
    2. Cable Preparation
    3. nstructors demonstration of a Class 1 Termination procedures
  3. Practical application
    1. Jobsheet #3 – Perform a Class 1 Termination
    2. Fundamentals of High voltage Splicing
  4. High Voltage Tape splicing Techniques
    1. Cable components
    2. Electrical characteristics
    3. Instructors demonstration of cable preparation
  5. Practical application
    1. Jobsheet #4 – Perform a 15KV mono conductor cable tape splice
  6. High voltage Premolded splicing Techniques
    1. Comparative analysis of tape splice vs. premolded splicing
    2. Cable Components
    3. Overview of cable splicing
  7. Practical Application
    1. Jobsheet #5 – Perform a 15KV mono conductor premolded splice
    2. Summary
  8. Review course outline
  9. Questions and Answers
  10. Performance Evaluation
  11. Written Exercise #1

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Electrical Maintenance
Training Electrical Maintenance
0
Yogyakarta Training

Training Electrical Maintenance

 

COURSE DESCRIPTION

This electrical maintenance course will discuss application, installation, electrical maintenance and testing issues related to Low Medium and High Voltage Electric Circuit Breakers, Switchgear and Electrical Power Transformers. The course will provide the delegates with a solid understanding of theory and standards. The course will also make the delegates aware of issues concerning the proper application, installation and maintenance of these types of equipment with a strong emphasis on safety. Our electrical maintenance training course will cover a wide range of material starting from the basics and moving on to more complex issues. This course provides an overview of electric power system design and theory, focusing on the types of equipment used most commonly in the Utility, Industrial, Commercial and Institutional applications. Basic Circuit Breaker and Transformer construction, electrical safety, and common maintenance techniques are major components of this course.

 

Who Should Attend

This course is recommended for skilled trades, supervisors and anyone involved in the electrical maintenance and operations of Circuit Breakers and Power Transformers.

 

Course Objectives

This course is designed to enable participants to:

  • Understand Switchgear, Circuit Breaker and Transformer Design
  • Work safely around substation equipment.
  • Understand the operating principles associated with the covered equipment.
  • Understand typically used protection and control systems.
  • Understand the interrelationships of electrical tests.
  • Understand the interpretation of test results.

 

COURSE OUTLINE

General Introductions

Safety Aspects

  • Legislation
  • Electrical Hazards
  • Energized Work
  • Personal Protective Equipment
  • Job Planning
  • Equipment Failure Costs

High, Medium, Low Voltage Switchgear

  • Ratings
  • Definitions
  • Types
  • Typical Construction
  • Control Power Systems

Electrical Maintenance of Protective Equipment & Instrument Transformers

  • Potential Transformers
  • Current Transformers
  • Transformer Differential Protection
  • Feeder Protection
  • Motor Protection

Circuit Breaker Construction & Features

  • Contact Operation
  • Arc Extinguishing Mediums, Sulphur Hexaflouride Gas, Air, Vacuum and Oil
  • Manual and Electrical operating Controls
  • Safe Operating Methods

Circuit Breaker Maintenance, Care & Testing

  • Mechanical Inspections
  • Contact Resistance Tests
  • Insulation Resistance Tests
  • Insulating Gas and Oil Analysis
  • Travel Analysis

Transformer Construction

  • Tank
  • Core, Coils, Types and Ratings
  • Bushings
  • Tap Changers
  • Factory Testing
  • Dry, Oil and Liquid Filled Types

Operation

  • Theory of Operation
  • Vector and Connection Diagrams
  • Important Electrical Relationships & Formulas

Auxiliary Equipment

  • Gas Relays
  • Fans and Pumps
  • Gauges
  • Tap Changer Controls

Failure Causes

  • Detailed analysis of several case histories
  • Lightening
  • Oil Decay
  • Component Failures
  • Internal Faults
  • External Faults

Testing Practices & Standards

  • Oil Analysis
  • Chemical Analysis
  • Dissolved Gas Analysis
  • Furan, Inhibitor, Power Factor Water and PCB Testing

Electrical Testing

  • Insulation Resistance and Polarization Index Tests
  • Turns Ratio, Excitation Current and Polarity Testing
  • Capacitance and Power Factor Testing
  • Winding Resistance Tests

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Electrical Testing and Commissioning of Electric Power Systems
Training Electrical Testing and Commissioning of Electric Power Systems
0
Yogyakarta Training

Training Electrical Testing and Commissioning of Electric Power Systems

 

Description

The electrical acceptance testing and commissioning of electric power systems is essential to the start up of any electrical system for the first time, regardless of its size, type or industry. It is a very special occurrence and poses some unique challenges to electrical personnel. Inexperience and poor planning will inevitably result in prolonged delays in the start up which can lead to costly productivity losses. This course provides invaluable information to anyone who wishes to know and understand the role of Electrical Acceptance Testing, Commissioning and Start-up of Electrical Power Distribution Systems. The importance of planning and preparation for the project, from engineering to commissioning and start up, will be emphasized. This course deals with safety considerations and testing and start-up procedures for all the components of any electrical system. The course leader will also offer useful guidelines on what to do when things go wrong during this phase of a project.

 

Course Outline

  1. Course Introduction
    Instructors introduction and background
    Management of commissioning projects
    About NETA
    Certification of Test Technicians
    Certification Test Examples
    NETA – ANSI Standards
    NETA – Frequency of Tests
    Overview – ATS 1999
  2. Electrical Theory
    Basic Electrical Theory & Commonly Used Formulae
    Time-Current Characteristics
    Electrical Definitions and Acronyms
    Ground Fault Systems
    Coordination studies
    Short Circuit Studies
    Device Evaluations
  3. Understanding Electrical Drawings
    IEEE Device numbers
    Drawing Symbols
    Single lines drawings
    3 line drawings
    AC/DC Trip & Control Schematics
    Wiring Diagrams
    General System Design, Lay-out and Drawings
  4. Component Testing Procedures
    Types of Commonly Used Test Equipment
    Insulation Resistance Testing
    Contact resistance Testing
    Current Injections, CT testing
  5. Safety
    Construction Site Considerations
    Safety during a start up project
    Temporary generators and construction power
    Personal Protective Equipment Voltage Detection Equipment, Hot-sticks, Grounds
    Temporary Grounds
    Qualified Electrical Personnel
  6. Documentation
    Management of Start Up & Commissioning Projects
    Turnover Packages
    Drawing control, field mark ups and “as builts”
    Test sheet document control
    Keeping track of completed tasks
    Deficiency tracking
  7. System Commissioning
    Ensuring the system is working completely
    Using electrical drawings
    Sensing Devices
    Isolating devices
    Relays and tripping devices
  8. NETA Acceptance Testing Specifications
    NETA Acceptance testing procedures of Electrical Equipment
  9. Substation Equipment Commissioning
    Ground Grid Design, Grounding (Step & Touch Potentials, Earth Resistivity, Bonding Resistance)
    Testing ground grids and soil resistivity
    High voltage towers and switches
    Outdoor SF6 Breakers
    Other Substation Equipment
    NETA Recommended Component tests
  10. Transformer Commissioning
    General Construction, Operation & Safety
    Field Assembly and Vacuum Filling of Power Transformers
    Handling Transformer Oil, Tapchangers
    Transformer Protective Devices, Bushings, auxiliary devices alarms & trips
    NETA Recommended ELectrical Acceptance Testing and Commissioning Tests
  11. Distribution Switchgear Commissioning
    General Construction, Operation & Safety
    Metal Clad Switchgear construction and safety features
    Commissioning Switchgear
    Breaker construction and safety features
    Capacitors
    Current Transformers
    Instrument Transformers, Test switches, Metering and Relaying Devices
    NETA Recommended Acceptance Tests
  12. Plant Start Up
    Pre-energization checklists
    First energization proceedures
    Phase rotation and other measured system parameters

 

Who Should Attend

Anyone who involved in commissioning of electrical power systems

 

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.