Training Electrical Safety for Non-Electrical Personal
Training Electrical Safety for Non-Electrical Personal
0
Yogyakarta Training

Training Electrical Safety for Non-Electrical Personal

 

Introduction 

A training module that meets Occupational Safety and Health Administration guidelines for training and awareness pertaining to practical safeguarding of employees in their workplace. This information is applicable to all electric equipment and installations used to provide electric power and light for employee workplaces. This course is designed to provide guidance on working safely on low voltage electrical equipment & systems (up to 1000V AC 1500V DC) located within industrial environments. The course will assist employees and companies reduce the risk of personal injury, due to electrocution and arc flash, also to help prevent damage to assets due to operator error.

 

Course Objectives

Upon completion of this training the student will be familiar with:

  1. Description of basic principles of electricity
  2. Typical electrical hazards and the types of injuries they can cause
  3. Protective measures for avoiding personal injury from electrical hazard
  4. General rules for responding to an electrical emergency
  5. To raise the level of safety awareness for all personnel working with electrical equipment and for the candidates to comprehend the safety rules, regulations & guidelines related to current legislation.

 

Who should attend?

Non electrical personnel requiring electrical safety awareness training to enable to become aware of the hazards associated with installing, maintaining or operating electrical equipment.

 

Outline Contents

  1. Hazards & Effects of Electricity.
  2. Arc Flash.
  3. Selection & Use of Suitable PPE.
  4. Electricity at Work Regulations 1989.
  5. Permit to Work (PTW).
  6. Electrical Documentation.
  7. Safe Electrical Isolations.
  8. Risk Assessments.
  9. Harmonised Cable Conductor Colours & Markings.
  10. Earthing & Bonding.
  11. Portable Appliances.
  12. Fault Levels & Fault Energy.
  13. Electrical Equipment in Hazardous Areas.
  14. Maintenance of Electrical Equipment.
  15. Safe Use of Test Equipment.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Fire Protection System
Training Fire Protection System
0
Yogyakarta Training

Training Fire Protection System

 

DESKRIPSI

Kesadaran akan pentingnya pencegahan kebakaran dan penanggulangan dini terhadap bahaya kebakaran, dalam industri menjadi hal yang  sangat mendasar dan diperlukan mengingat potensi bahaya kebakaran di dalam dunia industri sangat besar. Ketersediaan Fire Protection System yang handal menjadi syarat mutlak terhadap perlindungan personel dan berbagai asset perusahaan baik yang ada dalam pabrik (plant) maupun dalam gedung perkantoran.

Implementasi teknologi khususnya bidang engineering (rekayasa) untuk mendukung Fire Protection System telah banyak memberikan kemajuan yang significant guna memperoleh sistem keamanan dan keselamatan kerja untuk mencegah kebakaran, controlling, investigasi dan monitoring potensi bahaya kebakaran.

Dalam pelatihan ini, peserta akan diberikan ketrampilan terkait dengan Fire Protection System mulai dari desain, analisis, implementasi teknologi dan perawatan sistem proteksi yang ada. Dengan mengikuti pelatihan ini peserta akan memahami pentingnya upaya pencegahan kebakaran dan mengetahui sistem proteksi kebakaran yang handal bagi perusahaannya masing-masing.

 

TUJUAN PELATIHAN FIRE PROTECTION SYSTEM

Pelatihan ini diselenggarakan dengan tujuan :

  1. Memberikan pengetahuan tentang berbagai potensi bahaya kebakaran dalam dunia industri dan bagaimana cara mencegah dan menanggulanginya.
  2. Memberikan gambaran Fire Protection System yang handal dan paling sesuai dengan kebutuhan perusahaan
  3. Memberikan ketrampilan untuk mengembangkan analisis kebutuhan sistem proteksi, desain sistem proteksi dan peningkatan kinerja sistem proteksi kebakaran.
  4. Memberikan ketrampilan untuk melakukan perawatan dan trouble shooting sistem proteksi kebakaran yang sudah ada.

 

MATERI PELATIHAN FIRE PROTECTION SYSTEM

  • Introduction to Fire Protection System
  • Fire Protection Engineering (FPE)
  • Active Fire Protection Systems
  • Fire Detection and Alarm Systems (Smoke, Heat, Flame and Flammable Vapor Detectors, etc)
  • Fire Extinguishers (Portable and Fixed)
  • Wet Systems (Sprinkler, Wet Riser, Hose Reel, Hydrant)
  • Passive Fire Protection Systems
  • Designing An Effective Fire Detection and Protection System for Production Facilities
  • Design of A Pumping System for A Hose Reel System
  • Design of A Sprinkler Installation for A Typical Building
  • Fire Prevention
  • Operations and Maintenance for Fire Protection Systems
  • Fire Risk Assessment and Audit Techniques
  • Development of Fire Emergency Procedure

 

 

SASARAN PESERTA

Pelatihan ini sangat bermanfaat bagi engineer yakni bagi facilities engineers, maintenance engineers, design engineers, production and manufacturing engineers, process engineers, process designers, plant engineers dan  technicians serta pihak lain yang terlibat dalam pengawasan dan pengelolaan fasilitas proses dan keselamatan kerja 

 

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

Training Safe Operation & Maintenance of Switchgear
0
Yogyakarta Training

 

Training Safe Operation & Maintenance of Switchgear

 

DESCRIPTION

Switchgear (and circuit breakers) are obviously critical components in electrical distribution systems and their operation significantly affects the overall operation of the system. The workshop will discuss application, installation, maintenance and testing issues relating to medium and high voltage switchgear and circuit breakers. There will also be a coverage of low voltage switchgear. You will receive a thorough grounding in switchgear theory and standards. You will gain a solid understanding of the issues associated with the proper application, installation and maintenance of these critical items of equipment with an overriding emphasis on safety. This comprehensive and practical workshop emphasises medium voltage switchgear which represents most of the switchgear installed on electrical distribution systems. The focus here is on air blast, oil, SF6 and vacuum circuit breakers. Case studies covering the main manufacturer’s equipment will illustrate the important practical principles. Other power system protection components will be discussed as well to ensure that switchgear is understood in the correct context.

 

COURSE OBJECTIVES

Delegates will learn about the following:

  • Selection of appropriate type and rating of circuit breakers and switchgear
  • Fundamentals of operation of switchgear
  • Switchgear components (CTs, VTs, relays, cable terminations)
  • Safe operational policies including safety rules and safety documents
  • Diagnostic tools and test equipment
  • Safe maintenance policies including safe working in switch rooms, indoor and outdoor substations

 

COURSE CONTENTS

 

SWITCHGEAR – ORIGINS & TYPES

  • Single line diagrams
  • Active and passive network components
  • Circuit breaker utilisation
  • Alternative forms of MV switchgear – ring main units, load breaking/fault making switches,
  • Fuse switches
  • HV fuses in combination with, and as alternative to circuit breakers
  • Auto-reclosers and auto-reclose operation

 

APPLICATION OF SWITCHGEAR

  • Principles of current interruption
  • Plain break circuit breakers
  • Bulk and small oil volume circuit breakers
  • Turbulator (explosion pot)
  • Operating mechanisms
  • Transfer earth circuit breakers
  • Air break and air blast switchgear
  • SF6 and Vacuum
  • Switchgear in association with disconnectors
  • Fixed and withdrawable designs
  • Switchgear standards
  • Factors affecting switchgear selection

 

SPECIFICATION OF SWITCHGEAR

  • Switchgear rating – highest system and impulse withstand voltages, load and short circuit currents
  • Simple and complex protection systems
  • Switchgear ancillaries, measurement CTs, VTs, relays
  • Cable terminations
  • Indoor and outdoor operation
  • Substation and switch room layouts and design

 

SHORT CIRCUIT TESTING

  • Symmetrical and asymmetrical breaking
  • Make and break operations
  • Understanding test oscillograms

 

SAFETY POLICIES

  • General safety precautions and the use of personal protective equipment
  • Principles of safety rules
  • Principles of personnel authorisation
  • Operative training for safe operation of switchgear
  • Isolation in a circuit breaker context
  • Safety documentation
  • Operational and safety locking, caution and danger notices
  • Safe working in a substation environment
  • Safety interlocks
  • Substation alarms
  • Individual study task and presentation -safety policies in my company and how they might be improved

 

OPERATION OF MODERN SWITCHGEAR

 

ASSET MANAGEMENT IN A SWITCHGEAR CONTEXT

  • Principles of time and condition based asset management
  • Asset registers
  • Asset management systems

 

DIAGNOSTICS, TESTING & MAINTENANCE

  • Switchgear inspection methodologies
  • Partial discharge measurement and survey
  • Timing tests
  • Thermovision
  • Mechanisms of deterioration
  • Principles of circuit breaker maintenance
  • Maintaining oil circuit breakers
  • Contact maintenance and contact wipe
  • Oil testing
  • Maintaining vacuum circuit breakers
  • Maintaining SF6 circuit breakers
  • SOPs and DINs
  • Switchgear defects and defect control systems

 

WHO SHOULD ATTEND

This course is designed for personnel responsible for maintenance, testing and troubleshooting low voltage power circuit breakers, protective relays, breaker trip devices and switchgear panels. The lab provides students with the opportunity to work on a variety of low voltage circuit breakers.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

 

Training Reliability & Stability of Power Sistem
Training Reliability & Stability of Power Sistem
0
Yogyakarta Training

Training Reliability & Stability of Power Sistem

DESKRIPSI

Pelatihan ini difokuskan pada studi tentang skala besaran Power system dengan acuan tertentu untuk mempelajari prilaku jaringan serta gangguan yang mempengaruhi reliability & stabilitas dari  power system. Dalam training ini akan dipelajari tentang Teori mesin, Jalur transmisi, trafo dan komponen sistem pengendali utama serta perawatannya,

Diharapkan dari pelatihan ini, para peserta memahami konsep dasar tentang power system dan perawatannya sehingga dapat diperoleh realibility dan stabilitas dari suatu power system

 

MATERI PELATIHAN RELIABILITY & STABILITY Of POWER SYSTEM

  1. Network Components
  • Model dasar
  • Blondel transpormation
  • Steady-state machine model
  • Machine under sudden 3-phase short-circuit
  1. Power Transformer
  • Equivalent circuit
  • Transmission line
  • Power system loads
  1. Steady-state power system networks
  2. System transient stability models
  • Generator transient system models
  • Exitation system
  1. Sistem pengontrol
  2. Study kasus

 

PESERTA

This course is recommended for skilled trades, supervisors, and anyone involved in the maintenance of industrial power system.

 

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

Training Project Management Control
Training Project Management Control
0
Yogyakarta Training

Training Project Management Control

 

DESKRIPSI

 

Pembangunan suatu proyek konstruksi yang dikerjakan oleh kontraktor seringkali tidak sesuai dengan spesifikasi dan persyaratan lain yang tertuang pada dokumen kontrak.  Kecenderungan adanya gejala di mana pencapaian mutu hasil pembangunan baik berupa gedung, konstruksi jalan dan jembatan, serta bangunan irigasi, tidak konsisten dengan perencanaan teknis, di mana terlihat dari hasil pembangunan yang ternyata rentan mengalami kerusakan dan usia ekonomisnya lebih pendek dari perkiraan rencana semula. .Jika hal ini terjadi tentu yang dirugikan adalah pemilik modal / investor.  Untuk meminimalkan terjadinya penyalahgunaan, maka peran seorang QC dalam hal ini sangat diperlukan untuk melakukan inspeksi dan pengawasan, memonitor dan mengevaluasi pekerjaan yang dilakukan. Salah satu upaya untuk mencapai sasaran itu adalah dengan memberdayakan sumber daya manusia agar memiliki Quality Control of Civil Work yang memiliki kemampuan mengendalikan mutu proyek-proyek yang ditanganinya

 

TUJUAN PELATIHAN PROJECT MANAGEMENT CONTROL

  1. Peserta paham tentang pentingnya peran quality control dalam pekerjaan pembangunan proyek
  2. Meminimalkan terjadinya penyalahgunaan dan inkonsistensi dari proyek yang dikerjakan
  3. Peserta mampu melakukan perencanaan yang matang terkait fungsi pengawasan, inspeksi dan monitoring pekerjaan.

 

MATERI PELATIHAN PROJECT MANAGEMENT CONTROL

  1. Sikap dan Motivasi seorang Quality Control
  2. Manajemen Pengendalian Mutu
  3. Karakteristik tanah dan uji laboratorium untuk pekerjaan tanah dan pondasi
  4. Kontrol Pekerjaan tanah dan pondasi
  5. Pengendalian Mutu Pekerjaan Beton
  6. Evaluasi mutu beton
  7. Pengujian Tidak Merusak (NDT)
  8. Peralatan, Metoda, dan Pelaksanaan Pengujian NDT
  9. Pengendalian Mutu pada pelaksanaan pekerjaan konstruksi jalan
  10. Pengendalian mutu pada pelaksanaan penghamparan dan pemadatan
  11. Praktek Laboratorium dan Lapangan.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training HEAT EXCHANGER: Desing, operation maintenance and Trouble Shooting
Training HEAT EXCHANGER: Desing, operation maintenance and Trouble Shooting
0
Yogyakarta Training

Training HEAT EXCHANGER: Desing, operation maintenance and Trouble Shooting

 

DESKRIPSI

Heat Exchanger (HE) merupakan peralatan yang banyak digunakan dalam industri proses (process industry) yang berfungsi menukarkan/ mengalirkan panas dari suatu fluida ke fluida lainnya. Secara sederhana, prinsip kerja HE adalah dua fluida yang berbeda temperature, yang satu dialirkan dalam tube dan yang lainnya dalam shell hingga bersentuhan secara tidak langsung, sehingga panas dari fluida yang temperaturenya lebih tinggi berpindah ke fluida yang temperaturenya lebih rendah. Hasil dari proses ini adalah fluida panas yang masuk akan menjadi lebih dingin dan fluida dingin yang masuk akan menjadi lebih panas.

Peralatan ini banyak dipasang dalam sistem (plant) yang menghasilakan kalor/ panas yang tinggi sehingga membutuhkan proses pengaturan temperatur yang presisi tinggi agar potensi bahaya yang muncul sepeti peledakan, kebocoran dan sebagainya dapat dicegah.

Karena sistem ini sangat berisiko tinggi maka perlu desain sistem, pengoperasian, perawatan dan troubleshooting yang baik dengan mengacu standard desain, operasi serta perawatan yang berlaku.

 

TUJUAN PELATIHAN HEAT EXCHANGER: Desing, operation maintenance and Trouble Shooting

Setelah mengikuti pelatihan ini peserta diharapkan :

  • Mampu melakukan penilaian unjuk kerja suatu heat exchanger,
  • Dapat melakukan dasar-dasar prediksi penyebab gejala malfunction suatu heat exchanger,
  • Mampu mengembangkan teknik maintenance heat exchanger,
  • Memahami dan mampu melakukan perancangan awal berdasarkan rancangan beban kalor/thermal dan rancangan mekanis serta mengetahui bagaimana proses manufakturnya, sehingga mampu memilih spesifikasi heat exchanger,
  • Mampu melakukan troubleshooting permasalahn yang muncul dilapangan.

 

MATERI

  • Fundamental of heat transfer and fluid mechanic theory
  • General heat exchanger types and components
  • Characteristic of heat exchanger
  • Applicable standard for design and calculation of heat exchanger
  • Selection of heat exchanger
  • Material selection based on standard of ASTM
  • Basic design of heat exchanger
  • Perkembangan design heat exchanger
  • Performance of heat exchanger
  • Service life time, reliability and maintenance
  • Program maintenance
  • Real case studies of calculation from field experience problem
  • Operation & troubleshooting

PESERTA

Karyawan yang membidangi peralatan heat exchanger, teknisi, engineer, supervisor, manager yang bekerja pada bidang maintenance dan operation untuk berbagai macam industri.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Electronic Controler
0
Yogyakarta Training
Training Electronic Controler

Training Electronic Controler

 

DESKRIPSI

Sebagian besar implementasi sistem instrumentasi dan automasi dalam industri  menggunakan perangkat-perangkat pabrikan yang sudah siap pakai dan tinggal proses instalasi sesuai dengan kebutuhan sistem. Perangkat-perangkat tersebut biasanya berupa modul-modul controller baik yang beroperasi dalam mode analog maupun digital. User biasannya mengetahui prinsip kerja dan spesifikasi sistem berdasarkan datasheet maupun data manual dari perangkat modul tersebut. Akan tetapi tanpa didasari pemahaman dan sklii di bidang electronic controller, user juga akan menemui kesulitan jika mendapatkan masalah dalam instalasi, pengoperasian, troubleshooting maupun service dan perawatan perangkat tersebut.

 

TUJUAN PELATIHAN ELECTRONIC CONTROLLER

Pelatihan ini akan memberikan pedoman dalam pemakaian alat control elektronik, memahami watak dan aplikasi komponen elektronis, mampu merancang, membuat, menguji, dan menganalisis rangkaian analog  dan digital menggunakan berbagai instrument elektronis. Juga dikenalkan teknik trouble-shooting untuk rangkaian elektronika

Setelah mengikuti pelatihan ini, peserta di harapkan mampu untuk :

  • Memahami secara detail prinsip-prinsip teknik intrumentasi dan automasi
  • Memahami secara lengkap prinsip dasar electronic controller
  • Mendesain dan menganalisis rangkaian electronic controller
  • Troubleshooting , service dan maintenance

 

MATERI PELATIHAN ELECTRONIC CONTROLLER

  1. Introduction to electronic contoller
  2. Basic electronics
  3. Testing to electronic circuit in industry
  4. Theory and application of electronic circuits
  5. Establishing the analog electronic circuits
  6. Basic trouble shooting technique for electronic contoller
  7. Advanced theory of electronics
  8. Developing and testing operational amplifier (Op-Amp)
  9. Developing and testing digital electronic circuits
  10. Analysis of the complex electronic circuits
  11. Synthesis and analysis of inverter
  12. Case study (AVR, Microcontoller, PLC)

 

PESERTA PELATIHAN

Pelatihan ini sangat sesuai untuk  kalangan operators, technicians, electricians, maintenance personnel, engineers, managers and supervisors

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

 

 

 

Training Elecrical Transformer Testing and Maintenance
0
Yogyakarta Training

Training Elecrical Transformer Testing and Maintenance

COURSE DESCRIPTION:

This course covers the theory, operation, maintenance and testing of power transformers and auxiliary equipment. Topics included are transformer fundamentals, transformer ratings, transformer cooling, nitrogen gas systems and insulation systems. The source concludes with in-depth discussions on transformer testing techniques. This course is applicable to technicians and engineers who need a sound understanding of power transformer operation and maintenance.

Students will learn safe and proper maintenance and testing procedures on pad-mounted, power transformers. The course covers transformers used in commercial and industrial power distribution systems, including oil and dry-type units. Larger power transformers used in utility applications are also covered.

Load and no-load tap changer maintenance, ac and dc testing, routine inspections and oil sampling and testing are covered in detail. Students will learn how to perform routine oil tests, and understand how to perform the major tests that are required. A variety of electrical test equipment from various manufacturer’s will be discussed.

 

Who Should Attend:

Field and shop technicians, field engineers, supervisors and others responsible for the testing and maintenance of power transformers rated 750kVA to 500MVA and 4.16kV to 500kV.

 

LEARNING OUTCOMES

Upon completion of this course, the participant should be able to:

  • Explain the basic operation of a transformer.
  • Discuss turns ratios and calculate terminal voltage and current.
  • Discuss terminal markings and various single phase and three phase wiring schemes. (WYE vs DELTA).
  • Explain how to perform a polarity test on a potential transformer.
  • Discuss the electrical testing performed on transformers such as insulation resistance testing, excitation and power factor testing.
  • Discuss the various tests performed on insulating oil.

 

COURSE OUTLINE

  1. Transformer Principles
    • Transformers
    • Right Hand Rule
    • Magnetic Flux
    • Magnetic Induction
    • Left Hand RuleTurns Ratio
    • Transformer Losses
    • Transformer Types
  2. Vector Diagrams
    • Operating Principles
    • Operation Without Load
    • Operation with Load
  3. Transformer Classifications
    • Service Classification
    • Instrument Transformers
      1. Current
      2. Potential
  1. Transformer Construction (Construction)
    • Magnetizing Circuits
    • Losses
      1. Hysteresis Loss
      2. Eddy-Current Loss
    • Efficiency
      1. Cooling
    • AirCooled Oil-Immersed
      1. Water-Cooled
      2. Forced-Oil Cooling
      3. Self-Cooling with Air Blast
    • Temperature Limits
    • Transformer Loading
      1. Tap Changers
    • No-Load Tap Changer
    • Tap Changing Under Load
    • Phase-Angle Control
  2. Transformer Connections
    • Single Phase Circuits
    • Two-Phase Circuits
    • Three-Phase Circuits
  3. Transformer Maintenance
    • Insulation Testing
    • High Potential Testing
    • Turns Ratio Testing
    • Polarity Testing
    • Power Factor
    • Excitation Current
    • DC Winding Resistance
    • Polarization Recovery
    • Insulating Fluid Dielectric
    • Dissolved Gas Analysis
  4. Transformers and Relaying
    • Transformer Faults
    • Differential Relaying
  5. Normal Load
  6. External Faults
  7. Internal Faults

 

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Electrical System Analysis
Training Electrical System Analysis
0
Yogyakarta Training

Training Electrical System Analysis

 

Course Objectives:

 

  • Power System Analysis means verifying the adequacy of the power distribution system and it’s components.
  • Recognize coordination related disturbances and outages.
  • Collect the required data to perform a detailed coordination study.
  • Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

 

Course Contents:

 

  1. Introduction to Industrial Power Systems
  2. Short Circuit Theory and Terminology
    • Effects of Short Circuits
    • Fault Current Sources
    • Machine Reactances
    • Fault Current Characteristics
  3. Electrical Equipment Ratings
  • Fuses
  • Circuit Breakers
  • Motor Starters
  • Conductors and Bus
  1. Balanced Fault Calculations
  2. Coordination Fundamentals
  • Procedures
  • Data Collection
  • Scaling Factors
  1. Plotting Time/Current Curves
  • Circuit Breakers
  • Fuses
  • Time Delay/Instantaneous Relays
  • Relay Coordination Intervals
  1. Equipment Protection and Coordination
  • NEC and ANSI/IEEE Criteria
  • Conductors (Low and Medium Voltage)
  • Transformers
  • Motors e. Conductors (Low and Medium)

 

Who Should Attend:

This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Bearing Lubrication
Training Bearing Lubrication
0
Yogyakarta Training

Training Bearing Lubrication 

COURSE DESCRIPTION

This course covers real-world bearing lubrication in a dynamic, skills-based learning approach. Upon course completion, students will have learned the skills needed to choose, apply and maintain lubricants in bearing applications plant wide.

 

COURSE OBJECTIVE

Upon completion this course,

  • Participant will be able to evaluate and select appropriate lubricants for a wide variety of rolling element bearing applications. For greased applications, this includes choosing an appropriate grease base, stiffness, base oil and additives, if needed, for proper operation.
  • The participant will also be able to compute grease intervals and re lubrication amounts for a variety of application conditions, such as contamination, high or low temperatures and vibration.
  • For oil lubricated applications, the participant will be able to choose the correct oil viscosity, delivery method (standing oil, circulating oil, air/oil, oil mist) and oil change out intervals.
  • The participant will be to evaluate filter effectiveness, and to select and apply appropriate filter(s).
  • The participant will be able to troubleshoot common lubrication problems and recommend corrective actions.

 

COURSE CONTENTS

Lubrication fundamentals

  • Functions of lubrication
  • Basic expressions
  • Lubricant additives and their effects
  • Avoiding surface damage in bearings

Grease lubrication

  • Grease functions and properties
  • Grease delivery and metering systems
  • Selection of grease type: choosing the right grade, base, and oil for you application

Oil lubrication

  • Choosing the right lubricant: oil and grease quality standards and testing
  • Effects of cleanliness and contamination
  • Using bearings new life theory to predict effects of contamination
  • Effects of water ingress
  • Effective use of filtration, choosing the right filter
  • Change out intervals
  • Bearing housing design concepts
  • Comparison of oil delivery methods: static, wick-feed, lifting rings,  circulating oil, mist, air-oil, oil spot
  • Determining oil flow rates

Applying lubricants

  • Determining lubrication quantities and intervals
  • Hands-on lubrication and lubrication procedures for pillow blocks, ball bearings, roller bearings, sealed and shielded bearings
  • Electric Motor lubrication

Common error

  • Over greasing, under greasing, mixing greases

 

WHO SHOULD ATTEND

Maintenance personnel and engineers responsible for bearing lubrication, lubricant specification and lubrication system planning and design.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.