Training Motor Drives & Automation System
Training Motor Drives & Automation System
0
Yogyakarta Training

Training Motor Drives & Automation System

  1. DESCRIPTION

This technical course will discuss application and installation issues related to motors, variable frequency drives and related automation products in three concurrent sessions. The course will conclude with an operating demostration that will illustrate the three types of equipment tied together into one system via communication cabling, as well as over air via radio transmission.

The course will provide the delegates with a solid base of Motor, Drive and Automation theory. The course will also make delegates aware of issues concerning the proper application, installation and maintenance of these types of equipment. The material handouts will cover a wide range starting from the basics and moving on to more complex issues.

 

  1. COURSE OUTLINE
  2. Electric Motors
  • Electromagnetism
  • Developing a Rotating Magnetic Field
  • NEMA Rotor Characteristics
  • Motor Specifications
  • NEMA and IEEE standards
  • Enclosures
  • MG! Part 30 and Part 31 differences
  • Impregnation Systems
  • Stator Failures and preventative measures
  • AC Rotor Construction
  • Rotor Failures
  • Enclosures, Frames & Cooling
  • Bearings
  • Bearing Failures
  • Insulation Classes
  • General Motor Testing Methods
  • Motor Overhauls
  • Motor Rewinds
  • On-line Condition Monitoring
  • Information Management for Decision-making
  • Qualifying Repair Facilities
  1. AC Drives
  • VFD Overview
  • Voltage And Frequency
  • Basic AC Drive
  • Constant Torque Applications
  • Variable Torque Applications
  • Constant Horsepower Applications
  • Multi-motor Applications
  • Input Filtering requirements
  • VFD Demonstration
  • Output Filtering Requirements
    Control and Automation
  • Concepts of control and automation
  • Sensors and transducers
  • Actuators
  • Microcontroller
  • PLC (Programmable Logic Controller)
  1. Case Studies

 

III. WHO SHOULD ATTEND

This course is recommended for maintenance technicians, field engineers, and operators who are required to work with motors, drives and automation systems.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

Training Process Control & Instrumentation
Training Process Control & Instrumentation
0
Yogyakarta Training

Training Process Control & Instrumentation

 

DESCRIPTION

This course is designed to give participants a solid, practical understanding of common process control equipment and of the actual concepts and factors involved in setting up, maintaining, tuning, and troubleshooting a variety of control systems. Understand the actual control loops that you work with, learn about the limitations and possibilities of your equipment, improve productivity, efficiency, safety, and product quality. Save time and money on your next renovation or upgrade – get honest, unbiased information on what is available in the process control field, and the typical advantages and disadvantages of common equipment. Learn how to choose and setup the right control applications and control strategies for your plant processes. Learn to design, setup, configure, and tune actual control loops in a safe environtment. This training provides offers participants the unique opportunity to learn and experiment on real control loops without having to worry about damaging equipment or facilities. The content, pace, and scope of each course is adjusted to meet your exact training needs.

COURSE CONTENTS

  1. Process and instrument diagram
  2. Components of the feedback contol loop
  3. Effects of sensor
  4. Effect of control actuators
  5. Process dynamics
  6. Control valves
  7. Valve actuators
  8. Pulse control modulation
  9. Variable speed motor control
  10. On/off control action
  11. Multi point control action
  12. Analog control
  13. Proportional/gain action
  14. Integral/reset action
  15. Derivative/rate action
  16. Application of different control modes
  17. Desired control responses
  18. Control loop tuning methods
  19. Intelligent controllers
  20. Typical control features, options and capabilities
  21. Advanced control strategies
  22. Common problem in process control systems
  23. Troubleshooting process control systems

WHO SHOULD ATTEND

This course is best suited who are familiar with basic electricity, technicians, electricians, maintenance personnel, engineers, operators, managers and supervisors.

 

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

Training Mechanical Failure Analysis
Training Mechanical Failure Analysis
0
Yogyakarta Training

Training Mechanical Failure Analysis

 

OBJECTIVES

  • To provide basic concepts, principles, and to introduce the techniques and methodology of reliability assessment and evaluation as applied to mechanical components, equipment, and mechanical plant systems and sub-systems.
  • To improve the understanding of failures as related to their nodes, causes and effect.

COURSE CONTENTS

  1. Introduction
  • Implications of mechanical reliability
  • Definition of mechanical reliability
  • Reliability and rates of failures
  1. System Safety Analysis
  • Human Error
  • Routine Operations
  • Emergency Operations
  1. Methods of Analysis
  • Failures Modes and Effects Analysis (FMEA)
  • Event Trees
  • Fault trees
  1. Fault-Tree Construction
  • Nomenclature
  • Fault classification
  • Example
  1. Analysis of in-service experience for repairable systems :
  • A note on “ failure rate “
  • Reliability analysis under constant failure rate
  • System availability

 

WHO SHOULD ATTEND

Operators, technicians, supervisors, engineers, etc.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Preventive Maintenance of Electrical Equipment
Training Preventive Maintenance of Electrical Equipment
0
Yogyakarta Training

Training Preventive Maintenance of Electrical Equipment

DESKRIPSI

Setelah mengikuti kursus ini, diharapkan peserta memiliki pengetahuan tentang dasar-dasar perawatan dan pengujian terhadap peralatan listrik sesuai standar baku untuk memperoleh unjuk kerja yang baik, dapat memperpanjang umur peralatan.

 

MATERI PELATIHAN PREVENTIVE MAINTENANCE OF ELECTRICAL EQUIPMENT (PE-19)

  1. Introduction
  2. Dielectric & electrical insulation maintenance & testing
  3. Transformer preventive maintenace
  4. Generator & electric motor preventive maintenace testing
  5. Maintenace & testing of protective relays & over current
  6. Electrical power system grounding & ground resistance testing
  7. Fault Analysis

 

PESERTA

Operator, teknisi, engineer, dan praktisi yang menangani kegiatan perawatan dan reliability system.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

Training Testing Method for Electrical Equipment
Training Testing Method for Electrical Equipment
0
Yogyakarta Training

Training Testing Method for Electrical Equipment

 

DESKRIPSI

Setelah mengikuti kursus ini, diharapkan peserta mengerti bagaimana melakukan testing pada peralatan listrik yang benar.

 

MATERI PELATIHAN TESTING METHOD FOR ELECTRICAL EQUIPMENT (PE-21)

  1. Introduction
  2. Selection and Application of Electrical Equipment
  3. Preventive Maintenance of Electrical Equipment
  4. DC Testing of Electrical Equipment
  5. AC Testing of Electrical Equipment
  6. Electrical Power System Grounding and Ground Resistance Testing

 

PESERTA

Operator, teknisi, engineer, perancang, penyelia, manajer, dan lain-lainnya yang ingin mengetahui /memahami/mendalami bagaimana melakukan testing pada peralatan listrik yang benar.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

Training Cable Fault Location for Testing of Underground Cable
Training Cable Fault Location for Testing of Underground Cable
0
Yogyakarta Training

Training Cable Fault Location for Testing of Underground Cable

 

DESCRIPTION

This training program has been designed to thoroughly instruct personnel in state-of-the-art cable fault locating and cable testing methods. The course uses a combination of classroom lectures, demonstrations and hands-on field experiments to teach the trainee cable testing and cable fault locating. The course material has been selected to train the fault locator, cable tester or troubleman to produce results safely, faster and less expensively, with consistently reliable results. Utilities can realize substantial savings in cable replacement and manpower budgets with HDW’s expert cable fault locating and cable testing training and guidelines.

 

OBJECTIVE

The objective of this course is to train utility personnel, fault locators and testers in state-of-the-art cable fault locating and cable testing while keeping additional damage to the good cable system to a minimum. At the conclusion of this program, the trainees will:

  • Be able to locate faults with minimum risk to good cable
  • Be familiar with state-of-the-art cable fault locating and cable testing technique and equipment
  • Be able to select the right tool to do the job right

 

OUTLINE

  1. Background
  2. Introduction
  3. Safety and Isolation of Supply
  4. Pressure Testing and Faulty Core Identification
  5. Identifying the type of fault
  6. Cable Fault Locating Analysis and Flow Chart
  7. Frequency of Faults
  8. Cable Fault Locating Methods
  9. Cable Fault Locating Procedures
  10. Cable Fault Locating Hints
  11. Cable Diagnostics
  12. Using AC and VLF to determine Cable Condition
  13. Tan Delta and Partial Discharge – What they mean for a cable and how to use them to determine a cables condition.
  14. Electrical Testing of Switchgear, Transformers, Motors & Useful Testing and Monitoring Data.

PARTICIPANTS

The course has been designed to train troublemen, linemen, technicians, supervisors and engineers in state-of-the-art cable fault locating and cable testing with minimum risk to good cable. The instructors pay attention to the specific needs of all class attendees.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

 

 

 

Training Maintenence Turnaround Management
Training Maintenence Turnaround Management
0
Yogyakarta Training

Training Maintenence Turnaround Management

Description

After attending this course the participants are expected to be able to understand how to build an integrated Plant Turnaround inline with PDCA (Plan, Do, Check and Analyze) management cycle. The 3-days course will thoroughly cover strategic planning technique, work preparation, implementation and what the Maintenance Planner things to do. The participants will be encouraged to actively participate in the discussion on today’s quality improvement of plan and Turnaround procedure simplification.

 

The participants will learn about:

-Maintenance Turnaround performance related to how effective maintenance organization, how to develop performance indexes related to work-order, planning, scheduling, backlog control indicator developed by Marshall Institute.

-How to develop good maintenance planning including anticipating the common problems may arise.

-Implement planning and scheduling method, so that Planner is able to increase the maintenance -Turnaround management performance.

-Many aspects of maintenance inspection and variables to consider when performing maintenance Turnaround planning including spare parts, consumables, tools, equipments and manpower.

-Materials management system especially materials demand related to maintenance planning, including materials procurement, determining the minimum/maximum stock level in the inventory using ABC analysis and implementing the economic buffer stocks.

-Calculating the Availability Factor, Peak Shaving Maintenance cost.

-Standard terminology and objectives of planning and scheduling in line with the existing work load.

Turnaround or Shutdown in Terms of Maintenance at:

  • -Oil refinery and Oil & gas field,
  • -Mining
  • -LNG plant
  • -Petrochemical industry,
  • -Power plant and Other big capital-intensive industry.

Who Should Attend

  • -Maintenance Manager/ Superintendent/ -Engineer/ Planner/ Supervisor
  • -Project Engineer
  • -Process & Manufacturing/ Engineer
  • -Production Planner/ Engineer/ PPIC/ -Operation Engineer
  • -Other professional who wants to a better understanding and take advantage from the course subjec

Outline

  • – Introduction
  • – Breaking Ice
  • – Maintenance Roles & Responsibility
  • – Planning & Scheduling in Turnaround
  • – Turnaround Work Simplification
  • – Organization Model
  • – Basic Planning Program
  • – Material and Inventory
  • – Turnaround Planning Roles
  • – Total Planned Quality Maintenance
  • – Turnaround Cost Reduction by Planning Scheduling
  • – Turnaround Backlog Management
  • – Introducing & Implementing CMMS in Turnaround
  • – Major Overhaul & Turnaround. Developing SJP & – Tasklist
  • – Best Practice in Turnaround & KPI
  • – References

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

 

 

Training Fiber Optics Measurement
Training Fiber Optics Measurement
0
Yogyakarta Training

Training Fiber Optics Measurement

 

DESKRIPSI

Setelah kursus diharapkan peserta dapat memahami dan mengetahui pengukuran transmisi optik.

 

MATERI PELATIHAN FIBER OPTICS MEASUREMENT (TE-10)

  • Serat Optik
  • Splite Dan Konektor
  • Sumber Cahaya
  • Detektor Cahaya
  • Modulasi
  • Sistem distribusi
  • Pengukuran transimisi optik
  • Case Study

PESERTA

Operator, teknisi, engineer, perancang, penyelia, manajer di IT departement, etc.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

 

Training Fiber Optics Maintenance
Training Fiber Optics Maintenance
0
Yogyakarta Training

Training Fiber Optics Maintenance

 

DESKRIPSI

Setelah kursus diharapkan peserta dapat mengerti dan memahami serta mengetahui serat optik perencanaan, perancangan, pengawasan dan pemeliharaan kabel serat optik.

 

MATERI PELATIHAN FIBER OPTICS MAINTENANCE (TE-9)

  1. Serat Optik
  2. Splite Dan Konektor
  3. Sumber Cahaya
  4. Detektor Cahaya
  5. Perencanaan Transmisi Optik
    • Anggaran Daya
    • Anggaran Lebar Bidang
  6. Perancangan Outside Plant
  7. Perancangan Distribution Plant
  8. Review System Transmisi Serat Optik
  • Bentuk Umum Serat Optik
  • Jenis Serat Optik
  • Losses
  • Karakteristik Serat Optik
  • Sistem Komunikasi Serat Optik
  • Keuntungan Dan Keruagian Serat Optik

Pemeliharaan Kabel Serat Optik

Pemeliharaan Prefentif

Pemeliharaan Korektif

Instalasi Kabel Serat Optik

  • Aerial Cable
  • Burried Cable
  1. Case Study

PESERTA

Operator, teknisi, engineer, perancang, penyelia di IT departemen, etc.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

 

Training Purnace and Heat Excharger
Training Purnace and Heat Excharger
0
Yogyakarta Training

Training Purnace and Heat Excharger

DESKRIPSI

Furnace atau dapur atau ruang bakar adalah suatu konstruksi yang dirancang sebagai tempat untuk mendapatkan proses pembakaran, yaitu proses reaksi secara cepat antara unsur/molekul yang terdapat pada bahan bakar dengan oksigen, sehingga menghasilkan kalor. Kalor yang diperoleh digunakan untuk memanaskan zat yang membutuhkan/dikehendaki. Heat exchanger atau alat penukar kalor adalah suatu peralatan yang berfungsi untuk memindahkan kalor dari suatu fluida ke fluida yang lain karena perbedaan temperatur. Berdasarkan mekanisme transfer kalornya, ada berbagai jenis/tipe heat exchanger. Jenis shell dan tube heat exchanger merupakan jenis heat exchanger yang paling bayak digunakan dalam industri. Hal tersebut dikarenakan oleh kemampuannya beroperasi pada tekanan tinggi, pemilihan bahan yang leluasa, pengoperasian yang mudah maupun efektivitas perpindahan kalor yang tinggi.

MATERI PELATIHAN FURNACE AND HEAT EXCHANGER (PS-9)

  • Tentang berbagai bahan bakar serta sifat-sifatnya
  • Tentang peralatan bakar yang terkait dengan jenis bahan bakar yang digunakan dan karakteristiknya.
  • Proses pembakaran yang terjadi di dalam furnace
  • Alat-alat pengaman dan kontrol pembakaran dalam operasi
  • Perawatan furnace
  • Berbagai jenis dan konstruksi heat exchanger serta pemilihannya.
  • Proses spesifikasi dan desain thermo- hydraulic
  • Proses desain mekanis dan standard/code yang ada
  • Arah pengembangan heat exchanger untuk peningkatan transfer kalor
  • Operasi dan perawatan heat exchanger dan peningkatan reliability heat exchanger
  • Instrumen dan kontrol operasi untuk keamanan
  • Aspek ekonomi heat exchanger

PESERTA

Para teknisi, engineer, manajer dan personel bagian operasi dan perawatan pada perusahaan secara umum. Peserta training berpendidikan minimal sekolah menengah kejuruan dari bidang teknik.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.