Training Pumps & Compressors
Training Pumps & Compressors
0
Yogyakarta Training

Training Pumps & Compressors

 

COURSE INTRODUCTION

Pumps and Compressors are the most common equipment found in any operating plant. New advances in maintenance techniques enhance the operability and increases plant uptime. Predictive maintenance practices combined with preventive maintenance best practice solutions offer the course participants a comprehensive and systematic approach to help achieve profit goals and higher reliability.

 

AFTER ATTENDING THIS COURSE, YOU WILL RETURN TO YOUR JOB…

– Understanding clearly the key aspects of piping systems including design, operation, maintenance, failure prevention, and troubleshooting, including the applicable codes, standards and industry practices.

– Obtaining practical and effective methods and guidelines to assist in achieving, cost-effective operation and maintenance of piping systems with high technical integrity.

– Developing skills in troubleshooting and improving existing piping systems.

 

FOCUSING ON

  1. Preventive Maintenance
  2. Predictive Maintenance
  • Tools And Equipments
  • Oil Analysis
  • Vibration Analysis
  • Thermography
  • Ultrasonics
  • Best Approaches Towards Predictive Monitoring
  • Continuous Improvement Programs
  1. Designing A Proper Maintenance Mix
  2. Reliability Centered Maintenance
  3. Failures
  • Failure Mechanism
  • Types Of Failures
  • Failure Analysis
  • Failure Mitigation Measures

 

WHO SHOULD ATTEND

  • – Consulting Engineers
  • – Maintenance Engineers
  • – Project Engineers
  • – Maintenance Superintendents
  • – Maintenance Personnel
  • – Service Engineers
  • – Operators
  • – M & E Foremen
  • – Technical Assistants
  • – Technical Coordinators
  • – Purchasing and Materials Control Personnel
  • – Operation & Maintenance Personnel
  • – Technicians
  • – New/Trainee Engineers
  • – Contractors

METHODOLOGY

Participants learn through lectures with interactive presentation (Questions & Answers). As the subject progresses, active audience participation is encouraged along the entire course.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

 

 

Training Piping Engineering and Plant Design (PS 11)
Training Piping Engineering and Plant Design (PS 11)
0
Yogyakarta Training

Training Piping Engineering and Plant Design (PS 11)

 

OBJECTIVES

Upon completion of this course, attendees will have knowledge of piping engineering and plant design requirements and be able to begin applying them in their work.

COURSE CONTENTS

  1. Material selection considerations
  2. Fittings, flanges, and gaskets
  3. Valve functions, types, and selection procedure
  4. Loads and stresses
  5. Pressure design of components
  6. System layout considerations
  7. Pipe supports and restraints
  8. Piping flexibility
  9. Design information required for piping stress analysis
  10. Criteria for equipment nozzle loads
  11. Fabrication, assembly, erection, inspection, and testing
  12. Other considerations:
    • Non-metallic piping
    • Category M fluid service
    • High pressure piping
  13. Latest technology on piping design

 

PESERTA

  • Dasar pendidikan SLTA/D3
  • Operator/Teknisi
  • Pegawai terkait yang membutuhkan pengetahuan dasar tersebut.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

Training Pipe Stress Analysis
Training Pipe Stress Analysis
0
Yogyakarta Training

Training Pipe Stress Analysis

DESKRIPSI

Analisis tegangan pada sistem perpipaan memegang peranan penting dalam proses desain perpipaan, terutama untuk high pressure dan high temperature fluids. Pelatihan ini memberikan bekal pengetahuan tentang perencanaan sistem perpipaan secara mendetail dan mengatasi permasalahan yang terjadi pada sistem perpipaan.

 

MATERI PELATIHAN  PIPE STRESS ANALYSIS (PS 09)

  1. Pengantar perancangan sistem perpipaan
  2. Teori aliran fluida dalam pipa
  3. Material pada sistem perpipaan
  4. Perhitungan tekanan yang bekerja pada sistem perpipaan
  5. Analisa tegangan yang bekerja pada sistem perpipaan
  6. Perhitungan tebal pipa minimum
  7. Perhitungan penyangga pipa
  8. Perhitungan jarak antar penyangga
  9. Perhitungan expansion loop dan expansion joint
  10. Fitting dan perhitungannya
  11. Penggunaan Ansi dan Asme codes
  12. Software pipestress analysis

PESERTA

Kursus ini dapat diikuti oleh teknisi, engineer, supervisor yang bekerja pada bidang maintenance dan operation untuk berbagai macam industri.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Electrcial Power System Analysis Course Using ETAP
Training Electrcial Power System Analysis Course Using ETAP
0
Yogyakarta Training

Training Electrcial Power System Analysis Course Using ETAP

DESKRIPSI

This course is designed for electrical engineers, system operators, and planners to introduce the fundamentals of Transmission and Distribution engineering using ETAP. Theoretical and practical concepts and examples will be explored to assist the technical professional with their primary functions. Effects of system unbalance and solutions, optimization techniques using optimal power flow and capacitor placement will be analyzed as well as system operations such as switching and contingencies will be studied.

This course provides the skills, knowledge, and techniques necessary to become proficient in ETAP to conduct power system studies, from modeling to analysis. The purpose of this Course is to develop a thorough understanding of ETAP’s capabilities and analytical techniques to solve a variety of practical problems.

 

TOPICS:

General Overview, One-Line Diagram, Library Systems, Load Flow, Short-Circuit (ANSI and IEC), Arc Flash, Star (Device Coordination and Selectivity), Motor  Acceleration

MATERI PELATIHAN ELECTRICAL POWER SYSTEM ANALYSIS COURSE USING ETAPI

Modeling Electrical Systems

Creating a One-Line Diagram

  1. Build Skeleton of System
    1. Creating a new project
      • Minimum Data entry
      • Load Flow to double-check
      • Explain error review process
    2. Adding a New Substation
      1. Minimum Data Entry
      2. Cable Data Selector
    3. Dealing with Sub-One Line Diagrams
      1. System Dumpster
      2. Composite Networks
    4. Adding Protective Devices
      1. Auto-Insert
      2. Optional Data Entry
  • Show/Hide
  1. 3-D Modeling
    1. Presentations
    2. Configurations
  • Revisions
  • Load Flow Analysis

Open a Pre-Built Electrical System

  1. Display Results
  2. Study Case
  3. Calculation Methods
  4. Voltage Drop
  5. Loading
  6. Automatic Functions
  7. Alerts
  8. Reports

Short Circuit Analysis

  1. a) ANSI/IEEE Standards (C37)
  2. b) IEC Standards
  3. c) Transient Short-Circuit Analysis
  4. d) Study Case
  5. e) Calculation Methods
  6. f) Device Evaluation
  7. g) Alerts
  8. h) Reports

Device Coordination Analysis

  1. a) Device Curve Review
  2. b) Curve Selector
  3. c) Interface with One-Line Diagrams
  4. d) Interface with Short-Circuit
  5. e) Changing Device Settings
  6. f) Sequence of Operation
  7. g) Plotting/Reports

Arc Flash Analysis

  1. a) NFPA 70E Standards
  2. b) IEEE 1584 Standards
  3. c) Data Entry
  4. d) Calculation Methods

Evaluating Results

  1. f) Reports
  2. g) Labels
    1. h) Safety Equipment
    2. Motor Acceleration
    1. a) Static Acceleration: Approximating No Load / Full Load Time
    2. b) Dynamic Acceleration: Minimum Data Entry
    3. c) Load Transitioning
    4. d) Time Toolbar
    5. e) Adjusting Pre-Load
    6. f) Load Sequencing
    7. g) Increasing Load After Acceleration
    8. h) Reports and Plots

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

Training Electrical Transformer Testing And Maintenance
Training Electrical Transformer Testing And Maintenance
0
Yogyakarta Training

Training Electrical Transformer Testing And Maintenance

DESCRIPTION

This course covers the theory, operation, maintenance and testing of power transformers and auxiliary equipment. Topics included are transformer fundamentals, transformer ratings, transformer cooling, nitrogen gas systems and insulation systems. The source concludes with in-depth discussions on transformer testing techniques. This course is applicable to technicians and engineers who need a sound understanding of power transformer operation and maintenance.
Students will learn safe and proper maintenance and testing procedures on pad-mounted, power transformers. The course covers transformers used in commercial and industrial power distribution systems, including oil and dry-type units. Larger power transformers used in utility applications are also covered.
Load and no-load tap changer maintenance, ac and dc testing, routine inspections and oil sampling and testing are covered in detail. Students will learn how to perform routine oil tests, and understand how to perform the major tests that are required. A variety of electrical test equipment from various manufacturer’s will be discussed.

OBJECTIVE

Upon completion of this course, the participant should be able to:

  • Explain the basic operation of a transformer.
  • Discuss turns ratios and calculate terminal voltage and current.
  • Discuss terminal markings and various single phase and three phase wiring schemes. (WYE vs DELTA).
  • Explain how to perform a polarity test on a potential transformer.
  • Discuss the electrical testing performed on transformers such as insulation resistance testing, excitation and power factor testing.
  • Discuss the various tests performed on insulating oil.

OUTLINE

  1. Transformer Principles
  • Transformers
  • Right Hand Rule
  • Magnetic Flux
  • Magnetic Induction
  • Left Hand RuleTurns Ratio
  • Transformer Losses
  • Transformer Types
  1. Vector Diagrams
  • Operating Principles
  • Operation Without Load
  • Operation with Load
  1. Transformer Classifications
  • Service Classification
  • Instrument TransformersØ
    Current
    b. Potential
  1. Transformer Construction (Construction)
  • Magnetizing Circuits
  • Losses
    Hysteresis Loss
    b. Eddy-Current Loss
  • Efficiency
  1. Cooling
  • AirCooled Oil-Immersed
    Water-Cooled
    b. Forced-Oil Cooling
    c. Self-Cooling with Air Blast
  • Temperature Limits
  • Transformer Loading
  1. Tap Changers
  • No-Load Tap Changer
  • Tap Changing Under Load
  • Phase-Angle Control
  1. Transformer Connections
  • Single Phase Circuits
  • Two-Phase Circuits
  • Three-Phase Circuits
  1. Transformer Maintenance
  • Insulation Testing
  • High Potential Testing
  • Turns Ratio Testing
  • Polarity Testing
  • Power Factor
  • Excitation Current
  • DC Winding Resistance
  • Polarization Recovery
  • Insulating Fluid Dielectric
  • Dissolved Gas Analysis

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

Training Motors, Drives and Automation Systems: Installation, Application and Maintenance
Training Motors, Drives and Automation Systems: Installation, Application and Maintenance
0
Yogyakarta Training

Training Motors, Drives and Automation Systems: Installation, Application and Maintenance

 

Description

This technical course will discuss application and installation issues related to motors, variable frequency drives and related automation products in three concurrent sessions. The course will conclude with an operating demostration that will illustrate the three types of equipment tied together into one system via communication cabling, as well as over air via radio transmission.

The course will provide the delegates with a solid base of Motor, Drive and Automation theory. The course will also make delegates aware of issues concerning the proper application, installation and maintenance of these types of equipment. The material handouts will cover a wide range starting from the basics and moving on to more complex issues.

COURSE OUTLINE

Electric Motors

  • Electromagnetism
  • Developing a Rotating Magnetic Field
  • NEMA Rotor Characteristics
  • Motor Specifications
  • NEMA and IEEE standards
  • Enclosures
  • MG! Part 30 and Part 31 differences
  • Impregnation Systems
  • Stator Failures and preventative measures
  • AC Rotor Construction
  • Rotor Failures
  • Enclosures, Frames & Cooling
  • Bearings
  • Bearing Failures
  • Insulation Classes
  • General Motor Testing Methods
  • Motor Overhauls
  • Motor Rewinds
  • On-line Condition Monitoring
  • Information Management for Decision-making
  • Qualifying Repair Facilities

AC Drives

  • VFD Overview
  • Voltage And Frequency
  • Basic AC Drive
  • Constant Torque Applications
  • Variable Torque Applications
  • Constant Horsepower Applications
  • Multi-motor Applications
  • Input Filtering requirements
    – Line transients
    – Power Factor
    – Harmonic mitigation
  • VFD Demonstration
  • Output Filtering Requirements
    – Long Cable runs
    – dv/dt voltage rise
    – Peak voltage
    – Bearing Currents

Human Machine Interface and Automation Considerations

  • Introduction
  • PLCs
  • Number Systems
  • Terminology
  • Basic Requirements
  • Connecting External Device
  • Programming A PLC
    – Ladder Logic
    – Statement List
    – Function Blocks
  • Discrete Inputs/Outputs
  • Analog Inputs and Outputs
  • High-Speed Instructions
  • Communications
  • Network Communications
    – ASI
    – Data Highway
    – Profibus
    – Device net
    – TCIP
  • Demonstration

Who Should Attend?

This course is recommended for maintenance technicians, field engineers, and operators who are required to work with motors, drives and automation systems.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Training Power Generators and Voltage Regulators
Training Power Generators and Voltage Regulators
0
Yogyakarta Training

Training Power Generators and Voltage Regulators

 

Description

This four-day technical course includes a detailed study of power generators and voltage regulators, and the interaction between the two. The course also provides a solid understanding of generator paralleling, VAR flows, and generator/regulator response to changing loads and system voltages. A good working knowledge of polyphase AC theory is recommended as a prerequisite; however, a refresher of the important fundamentals is presented at the beginning of the course. This course is designed to enable participants to:

  • Identify the peak and effective AC voltage values on a waveform
  • Describe the fundamental operations of a generator
  • Describe how generators operate in parallel
  • Describe the operating principle of differential protection

Course outline Training Power Generators and Voltage Regulators

  1. Fundamentals of AC Power
  2. AC waveforms
  3. AC phase relationships
  4. Resistance in AC circuits
  5. Capacitance in AC circuits
  6. Power in AC circuits
  7. Semiconductor Fundamentals
  8. Atomic review
  9. Semiconductor conduction
  10. Extrinsic semiconductors
  11. Diodes
  12. Transistors
  13. Silicon controlled rectifiers
  14. Thyrite
  15. Logic review
  16. Operational amplifiers

III. AC Synchronous Generators

  1. Voltage regulator function
  2. Voltage regulator components
  3. Voltage regulator operation
  4. Auxiliary regulator functions
  5. Voltage regulator troubleshooting
  6. Voltage Regulators/Exciters
  7. Voltage regulator function
  8. Voltage regulator components
  9. Voltage regulator operation
  10. Auxiliary regulator functions
  11. Voltage regulator troubleshooting
  12. Generator Protection
  13. Short circuit protection
  14. Ground fault protection
  15. Overload protection
  16. Thermal protection
  17. Overspeed protection
  18. Low field excitation or loss of field excitation protection
  19. Generator motoring protection
  20. Protection against unbalanced faults
  21. Overexcitation protection

WHO Should Attend?

This course is recommended for maintenance technicians, field engineers, and operators who are required to work with fixed plant generation equipment.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

 

Training Transformer Operation and Maintenance
Training Transformer Operation and Maintenance
0
Yogyakarta Training

Training Transformer Operation and Maintenance

OBJECTIVES

  • Improvement knowledge on the basic principle of transformer
  • Understand the types of transformer used in power generation and distribution system
  • Learn how to perform electrical & thermal calculation in transformer design
  • Learn how to select, use and analyze relay protection usage in transformer system
  • Improve knowledge how to properly maintain transformer

 OUTLINE OUTLINE

  • Jenis dan seleksi pemakaian transformator
  • Standard Operasi
  • Transformator Protection
  • Impedance
  • Insulation level
  • Vector group
  • Operasi tunggal dan parallel
  • Jenis pendingin dan cara penerapannya

 WHO SHOULD ATTEND

The following selected participants should attend this course:

  • Electric Engineer/ Supervisor/ Technician
  • Plant Maintenance Engineer/ Supervisor/ Superintendent
  • Engineer from transformer manufacture
  • Staffs who are in charge of ordering, replacement and
  • Refurbishing of electrical equipment
  • Experience professional who want to review or broaden their understanding of transformer system
  • Everybody or professional who wants to broaden knowledge or gain benefit from this course

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

 

Training Dasar-Dasar Mechanical & Eletrical
Training Dasar-Dasar Mechanical & Eletrical
0
Yogyakarta Training

Training Dasar-Dasar Mechanical & Eletrical

DESKRIPSI

Peserta akan mempunyai kemampuan mengoprasikan peralatan mekanik dan listrik dengan baik, mengenali gejala-gejala yang terjadi selama operasi, merawat dan mengatasi masalah yang timbul pada operasi, merawat dan mengatasi masalah yang timbul pada operasi system mekanik dan listrik dengan dilengkapi kemampuan monitoring kondisi dari system peralatan mekanik dan listrik.

MATERI PELATIHAN DASAR2 MECHANICAL & ELECTRICAL: OPERATION, MAINTENANCE and TROUBLESHOOTING

  1. Bidang Mekanikal
  2. Compessor
    (Dasar-dasar Mekanika Fluida, Dasar & prinsip kerja Engine – Compressor, Kontruksi Diesel Engine & Compressor, Instalasi Compressor, Pemilihan Compressor, Sistem Bahan Bakar Diesel Engine, Pelumas dan Sistem Pelumasan Mesin, Alignment & Misalignment Mesin, Vibration Monitoring, Lubricant Monitoring, Engine – Compressor Troubleshooting).
  3. Pompa
    (Dasar Pompa, Kontruksi pompa, Instalasi pompa, Kinerja dan pengujian pompa, pemilihan pompa, Perawatan berkala pompa,Troubleshooting pompa, Alignment dan getaran pompa).
  4. Plumbing
    (Dasar plumbing, Konstruksi plumbing, Instalasi plumbing).
  5. HVAC
    (Dasar HVAC, Instalasi HVAC, Perawatan HVAC, Troubleshooting)
  6. Bidang Elektrik
  7. Prinsip Dasar Ketenagalistrikan
    (Arus bolak balik dan searah, Rangkaian Listrik)
  8. Instalasi Penerangan dan Tenaga
    (Teknik Pencahayaan, Motor listrik, Teknik Pengasutan, Perawatan dan Troble shooting)
  9. Peralatan Listrik
    (Konduktor, Isolator, Saklar, Panel, Pengaman)
  10. HVAC (Prinsip dasar HVAC, Konstruksi HVAC, Instalasi HVAC, Perawatan HVAC, Troubleshooting

TUJUAN PELATIHAN DASAR2 MECHANICAL & ELECTRICAL: OPERATION, MAINTENANCE and TROUBLESHOOTING

  1. Peserta memahami dasar mekanik dan listrik
  2. Memahami prinsip kerja dari peralatan mekanik dan listrik
  3. Peserta memahami jenis-jenis peralatan mekanik dan listrik
  4. Peserta dapat memahami bagian/komponen mekanik dan listrik
  5. Peserta dapat melakukan perawatan Preventive dan Predictive sistem peralatan mekanik dan listrik
  6. Peserta mampu melakukan pengukuran  Peserta dapat melakukan troubleshooting

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.

Training Kualitas Daya dan Efisiensi Energi
Training Kualitas Daya dan Efisiensi Energi
0
Yogyakarta Training

Training Kualitas Daya dan Efisiensi Energi

DESKRIPSI

Efisiensi penggunaan tenaga listrik dipengaruhi banyak faktor, diantaranya sangat tergantung pada kualitas daya listrik. Untuk mendapatkan kualitas tenaga listrik yang baik, diperlukan cara untuk mengetahui hal-hal yang dapat mempengaruhi kualitas daya diantaranya harmonisa, faktor daya, efisiensi, dan drop tegangan guna meminimalkan kerugian serta gangguan dalam penggunaan daya listrik. Untuk itu dalam pelatihan ini, diharapkan mampu memberikan solusi agar kualitas listrik dapat dihasilkan dengan baik sehingga tidak mempengaruhi kerja suatu sistem.

TUJUAN PELATIHAN KUALITAS DAYA DAN EFISIENSI ENERGI

Setelah mengikuti pelatihan ini, peserta diharapkan mampu untuk :

  • Memahami penyebab in-efisiensi energi listrik dan penurunan kualitas daya listrik
  • Menganalisa berbagai factor kualitas daya
  • Membuat solusi untuk mengatasi penurunan kualitas daya dan peningkatan efisiensi daya listrik

MATERI PELATIHAN KUALITAS DAYA DAN EFISIENSI ENERGI

  • Over View : Power System dan Kualitas Daya
  • Faktor-Faktor yang Mempengaruhi Kualitas Daya Listrik
  • Gangguang pada Sistem Tenaga Listrik
  • Analisa : Harmonics
  • Analisa : Faktor Daya
  • Analisa : Penurunan Tegangan dan Daya Reaktif
  • Kapasitor Bank : Desain, Kalkulasi & Instalasi
  • Uji Kualitas Daya
  • Instrument Kualitas Daya
  • Efisiensi Energi Listrik
  • Troubleshooting
  • Studi Kasus

PESERTA PELATIHAN

Pelatihan ini sangat sesuai diikuti oleh jajaran ataf, supervisor dan manajemen di bagian power system deparment, electrical engineering, dan perawatan power system.

Fasilitas Yang Diperoleh

  • Lokasi Training di Hotel Bintang 3-5
  • Ruang Pelatihan Full AC, Toilet dan Musholla
  • Perlengkapan Visual LCD Proyektor, & Whiteboard
  • Modul / Handout(Hard Copy & Soft Copy)
  • Training Kit (Co-Card, Bolpoin, & Buku Catatan)
  • 1x Makan Siang dan 2x Coffee Break (Snack)
  • Penjemputan Bandara Hotel (Pulang-Pergi selama pelatihan)
  • Basement Tempat Parkir Motor dan Mobil yang Aman
  • Akses Internet Wireless
  • Smoking Area.
  • Sertifikat Keikutsertaan Training
  • Merchandise menarik dari Duta Pro Training & Consulting
  • Konsultasi dengan Instruktur/Narasumber setelah Pelatihan

Biaya Training

  • Rp 6.800.000,- / Peserta (termasuk penginapan, minimal 2 peserta)

Lokasi Training di Yogyakarta

Keterangan

  1. Jumlah Peserta dapat memperngaruhi biaya training.
  2. Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
  3. Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
  4. Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.

Dapatkan Penawaran Harga Training Terbaik dari Kami!.

Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan public atau online training ini, silakan isi form di Formulir Pendaftaran.